Cabelas sausage stuffers, old and new style.

[erain]

2009

About the motor, I had so much trouble getting one in from weston. This com. Supplies cablas with all of there stuffers and motors. I did not buy from cablas. I bought from weston. I had my hands full with them. The run around i got drove me to drink. Anyway all end well. I retro fit my stuffer for the green motor and have had great success with it. I should say that i did have to have the drive gear fitted for the 12mm shaft.

so which stuffer do you have with which motor??? just curious as to the mods you made to make it work, sounds like you are using the green motor? which has the splined shaft. the green motor is the clutchless one which was removed from market somewhere around 2009(guessing)... also has the splined shaft.

This is great. I can tell you right now cablas and weston are not happy about this post. The last thing they wanted was for all the other owners of other stuffers to see this. Your Great. Good for you. I know who hard it is to get those people to do the right thing. Take Care Keith.

well i guess i wasnt too happy about a stuffer advertised as commercial grade ending up with these problems. but just want to say, cabelas and weston do supply alot of product used by members here. mostly without issues. but like Rich said, food saftey here is priority.

[Yes04]

Hi, I took the gear out of the motor and the spline bored at the shop. It really is easy to do. You have to take the stuffer gear shaft off the stuffer. Then disassemble the motor and remove the spline. Bore the spline to match the gear shaft of the stuffer.

[Yes04]

Stuffer

20
so which stuffer do you have with which motor??? just curious as to the mods you made to make it work, sounds like you are using the green motor? which has the splined shaft. the green motor is the clutchless one which was removed from market somewhere around 2009(guessing)... also has the splined shaft.


well i guess i wasnt too happy about a stuffer advertised as commercial grade ending up with these problems. but just want to say, cabelas and weston do supply alot of product used by members here. mostly without issues. but like Rich said, food saftey here is priority.

The motor is the green one. And the stuffer is a horizontal 25lb Leonardi. From Italy.

[erain]

Hi, I took the gear out of the motor and the spline bored at the shop. It really is easy to do. You have to take the stuffer gear shaft off the stuffer. Then disassemble the motor and remove the spline. Bore the spline to match the gear shaft of the stuffer.

i used to be a machinest back in the day. be nice to have access to some of that equipment!!!

just curious on how you "bored" bore a spline, this would be on the female side so maybe with a broach??? Lee???

[Yes04]

Hi, It was a broach. Thanks Keith