Announcement

Collapse
No announcement yet.

How to Gauge Temperature

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to Gauge Temperature

    I smoked a rack of ribs this weekend using a Weber kettle. I'm new to smoking meats, but I'm very comfortable on my Weber gas grill, which has a built thermometer.

    My question is how to measure the temperature on a kettle grill. The only thing I knew to do was to place my thermometer through the vent openings on top. But that places the thermometer a few inches above the cooking level and I'm sure with fire, that can make a huge difference.

    I was shooting for a cooking temp of 200 and settled for a temp of 220 before putting the ribs on. Of course, that slowly dropped over the course of a few hours and I finally pulled them off when the thermometer read 187.

    I did have to wrap the ribs in foil for about 20 minutes at the end to get the internal meat temp to 165.

  • #2
    Run the probe thru a potato or a wood block placed on the grill. Make sure at least the last 1" or so of the probe is in the air.
    In God I trust- All others pay cash...
    Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
    Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

    Comment


    • #3
      Excellent idea! I didn't even think of that. Thanks.

      Comment


      • #4
        Originally posted by gdpmumin View Post
        Excellent idea! I didn't even think of that. Thanks.
        I can't take credit tho...been done for years around here.

        Next?
        In God I trust- All others pay cash...
        Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
        Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

        Comment


        • #5
          you are using a digital thermo right??? The type a probe plugs into a unit outside grill.

          Comment


          • #6
            Guess I am old school, I go by feel.

            I dont use a thermo to gauge temps in my kettles, I use my hand and put it over the top vent. Pretty much know by experience approx how hot it is by feel.
            Just because you welded some shit together doesnt make it a WSM.

            Twitter: @GrubSeeker

            Comment


            • #7
              Yes, it's a digital thermometer with a long probe at the end of a long heat-resistant cable. The display sits outside. Technically, it's a meat thermometer and doesn't read above 425 degrees, but that's ok for smoking.

              Comment


              • #8
                Originally posted by chisoxjim View Post
                Guess I am old school, I go by feel.

                I dont use a thermo to gauge temps in my kettles, I use my hand and put it over the top vent. Pretty much know by experience approx how hot it is by feel.
                Sooo my advice... use the thermo, and the hand. In a short time you'll know by feel. I use the hand method on my WSM lid. 2 second hold is good BBQ temps. 3+ is too low, OUCH is too hot
                In God I trust- All others pay cash...
                Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
                Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

                Comment


                • #9
                  Originally posted by Richtee View Post
                  Sooo my advice... use the thermo, and the hand. In a short time you'll know by feel. I use the hand method on my WSM lid. 2 second hold is good BBQ temps. 3+ is too low, OUCH is too hot
                  yes sir.

                  having a smoker for a few years and a hundred or so cooks takes alot of guesswork out of it.
                  Just because you welded some shit together doesnt make it a WSM.

                  Twitter: @GrubSeeker

                  Comment


                  • #10
                    Originally posted by chisoxjim View Post
                    Guess I am old school, I go by feel.

                    I dont use a thermo to gauge temps in my kettles, I use my hand and put it over the top vent. Pretty much know by experience approx how hot it is by feel.
                    So how hot is she? By feel of course.
                    Mark
                    sigpic


                    "Likes smokey old pool rooms, clear mountain mornins. Little warm puppies, children and girls of the night"?
                    Smoked-Meat Certified Sausage Head!

                    Comment


                    • #11
                      Next time, try for a cooking temp of 300ish at your probe, and power through. Nothing wrong with hot and fast. It just gets done sooner, and you get more sleep.
                      sigpic

                      Modded Brinkmann Gourmet. Basic UDS. Rescued 22.5" OTS. Stubbs. B&B Oak Lump

                      Comment


                      • #12
                        Originally posted by El Ropo View Post
                        Next time, try for a cooking temp of 300ish at your probe, and power through. Nothing wrong with hot and fast. It just gets done sooner, and you get more sleep.
                        He was doing ribs. Not saying you can't do ribs at 300° but who needs to sleep while doing ribs?

                        Dave
                        CUHS Metal Shop Reverse Flow
                        UDS 1.0
                        Afterburner
                        Weber Performer
                        Blue Thermapen
                        Thermoworks Smoke with Gateway
                        Thermoworks Chef Alarm
                        Auber Smoker Controller
                        Proud Smoked-Meat Member #88
                        -
                        "All welcome, take what ya need, share what ya know. " -- Richtee, 12/2/2010

                        Comment


                        • #13
                          Originally posted by DDave View Post
                          He was doing ribs. Not saying you can't do ribs at 300° but who needs to sleep while doing ribs?

                          Dave
                          I took me a nap on last hamburgers Dave...LOL.......sorry...must be moon faze got me hunkied tonite...

                          Tasunka Trucker big on 210 degree ribs...pull back and all...that definetly hammock material....

                          Comment


                          • #14
                            Originally posted by ALX View Post
                            Tasunka Trucker big on 210 degree ribs...pull back and all...that definetly hammock material....
                            Right, but you wouldn't want to "power through" ribs so you can get more sleep. You're talking about taking your time with ribs so you can get more sleep.

                            I understand the "power through" with a brisket or butt so you can do one in the daytime, but what's the hurry with ribs?

                            Well okay, I guess if you want some ribs after work for dinner you may be in a hurry.

                            Dave
                            CUHS Metal Shop Reverse Flow
                            UDS 1.0
                            Afterburner
                            Weber Performer
                            Blue Thermapen
                            Thermoworks Smoke with Gateway
                            Thermoworks Chef Alarm
                            Auber Smoker Controller
                            Proud Smoked-Meat Member #88
                            -
                            "All welcome, take what ya need, share what ya know. " -- Richtee, 12/2/2010

                            Comment


                            • #15
                              Here's my next problem. The ribs don't get anywhere near 170 at a cooking temp of ~200 degrees. Last time I wrapped them in foil to bring the temp up. That worked. But this time, I used the 2-2-1 method and right now, after 4 and a half hours, they're only at 143.

                              Comment

                              Working...
                              X