I cooked 2-7.5 lb pork shoulders this last weekend. The shoulder stalled at 128 degrees for 4 hours. My question is since it didnt get over 140 in 4 hrs is the meat safe to eat? I vacuumed packed the pulled pork to use on a camping trip. My uds was running at 250 degrees the whole time. I checked the meat with 2 instant read thermometers and 2 different pit thermometers.
Announcement
Collapse
No announcement yet.
4 hour stall at 125 degrees.
Collapse
X
-
If it was unpunctured whole muscle, ie not injected, not violated by a temp probe, and assuming it was below 40° when you started, only the outer 1/2 inch needs to get above 140° in four hours.
Actually, I believe the 2010 Food Code posted by bbally sets the bar at 135° now.
DaveCUHS Metal Shop Reverse Flow
UDS 1.0
Afterburner
Weber Performer
Blue Thermapen
Thermoworks Smoke with Gateway
Thermoworks Chef Alarm
Auber Smoker Controller
Proud Smoked-Meat Member #88
-
"All welcome, take what ya need, share what ya know." -- Richtee, 12/2/2010
-
Originally posted by smokingeagle View PostI cooked 2-7.5 lb pork shoulders this last weekend. The shoulder stalled at 128 degrees for 4 hours. My question is since it didnt get over 140 in 4 hrs is the meat safe to eat? I vacuumed packed the pulled pork to use on a camping trip. My uds was running at 250 degrees the whole time. I checked the meat with 2 instant read thermometers and 2 different pit thermometers.Once you go Weber....you never call customer service....
Comment
-
Originally posted by DDave View PostIf it was unpunctured whole muscle, ie not injected, not violated by a temp probe, and assuming it was below 40° when you started, only the outer 1/2 inch needs to get above 140° in four hours.
Actually, I believe the 2010 Food Code posted by bbally sets the bar at 135° now.
DaveOnce you go Weber....you never call customer service....
Comment
-
Originally posted by IrishChef View PostWhat I worry about is how long it took to get to 128*. He said it stalled there. He didn't mention how long it was on total..Great point. I totally missed that.
But still if it was unpunctured, only the outer 1/2" comes into play. But who knows what the outer 1/2" temp was.
Just does not seem possible if the UDS was actually at 250°.My money is on a whacked thermo or something.
Dave
On Edit: Here is a link to the 2009 Food Code posted by Bbally.
http://www.smoked-meat.com/forum/showthread.php?t=6182CUHS Metal Shop Reverse Flow
UDS 1.0
Afterburner
Weber Performer
Blue Thermapen
Thermoworks Smoke with Gateway
Thermoworks Chef Alarm
Auber Smoker Controller
Proud Smoked-Meat Member #88
-
"All welcome, take what ya need, share what ya know." -- Richtee, 12/2/2010
Comment
-
Originally posted by DDave View PostGreat point. I totally missed that.
But still if it was unpunctured, only the outer 1/2" comes into play. But who knows what the outer 1/2" temp was.
Just does not seem possible if the UDS was actually at 250°.My money is on a whacked thermo or something.
Dave
Agree on the thermometer issue. Probably on the pit.Once you go Weber....you never call customer service....
Comment
-
Originally posted by DDave View PostBut still if it was unpunctured, only the outer 1/2" comes into play.
I am not a food safety expert nor do I play one on TV.
DaveCUHS Metal Shop Reverse Flow
UDS 1.0
Afterburner
Weber Performer
Blue Thermapen
Thermoworks Smoke with Gateway
Thermoworks Chef Alarm
Auber Smoker Controller
Proud Smoked-Meat Member #88
-
"All welcome, take what ya need, share what ya know." -- Richtee, 12/2/2010
Comment
-
So I checked the pit thermometers and the instant read and found the pit temps off 12 degrees. They only got to 200 degrees if water boils at 212. The instant read i have is off 8 degrees only read 204 degrees. With that being said i think i should be safe right.4 UDS, 80 gallon horizantal, 2 weber kettles, and a gas vertical smoker.
Addicted to smoking!
Comment
-
Originally posted by DDave View PostActually, I should say, it is my understanding that only the outer 1/2" comes into play.
I am not a food safety expert nor do I play one on TV.
DaveOnce you go Weber....you never call customer service....
Comment
-
Originally posted by ALX View Post250 degree and 128 degree in that time....Sorry...impossible be that low of internal dude...
Nice have accurate thermos..Originally posted by smokingeagle View PostSo I checked the pit thermometers and the instant read and found the pit temps off 12 degrees. They only got to 200 degrees if water boils at 212. The instant read i have is off 8 degrees only read 204 degrees. With that being said i think i should be safe right.
the uds thermometer is off 12*F. so 250*F could have been as high as 260*F +/- a wee bit.
the insta read was off 8*F. so 128* could have been as high as 136*F again +/- a wee bit.
and the time line is six (6) hours...
i am not trying to be a smart ass as i ask this next question.
are you certain that the butt was completely thawed?Island of Misfit Smokers Member #92
How to heal the world. Love people and feed them tasty food.
sigpic
Comment
-
Originally posted by crusty ol salt View Posti am still pondering this,
the uds thermometer is off 12*F. so 250*F could have been as high as 260*F +/- a wee bit.
the insta read was off 8*F. so 128* could have been as high as 136*F again +/- a wee bit.
and the time line is six (6) hours...
i am not trying to be a smart ass as i ask this next question.
are you certain that the butt was completely thawed?
And what you really need to consider, is do you want to be off on your canoe trip, in the middle of nowhere, and risk the chance of having all members of your group simultaneously blow colon? Shitting in the middle of a lake can be done, but..... better safe than sorry.Once you go Weber....you never call customer service....
Comment
Comment